Chemistries                 1300 887 735

Filtersense Products

 Print

*For more information on other products from this range please contact us on 1300 887 735/0800505566

Particulate Monitor

Please call 1300 8877 35 to request a quote or for more information.

Particulate Monitor: EM 30 LGX

The EM 30LGX is the process industries most reliable baghouse monitor, filter leak detector and cyclone overflow detector. It is also easy to operate.Simply apply power and begin assessing filter condition. For alarm setup the display provides both a logarithmic analog bar graph and an absolute digital readout. The log scale enables simultaneous observation of baseline readings and high dynamic peaks caused by filter cleaning cycles which is essential to set alarms.

Features:

  • Advanced Induction-Sensing
  • Ultra Reliable Protected-Probe
  • Detect Leaks Before Visible Emissions
  • Prevent the Escape of Valuable Powders
  • Protect Downstream Equipment
  • Superior to Traditional Triboelectric

Specification:
Control Unit

  • Power supply: 115/230VAC 50/60Hz Std (6 Watts max) 24VDC Opt
  • Outputs: 2 Relay (SPST 5A@240VAC) Std 1 Isolated 4-20mA Opt
Sensor
  • Probe Lengths: 3, 5, 10, 15, 20, 30, 36" (Approximately 1/2 duct/pipe I.D.)
  • Sensor Cable: 300’ (100m) 
PM100

Please call 1300 8877 35 to request a quote or for more information.

Particulate Monitor: PM 100 (Multichannel Configuration)

FilterSense’s renowned, virtually maintenance-free particulate flow sensing technology and FilterSense's MICS™ platform (Modular Instrumentation and Control System), the PM 100 combines unmatched performance with state-of-the-art instrument modularity and functionality.

Features:

  • Flexible, Modular, Expandable Design
  • Wide Range of I/O and Fieldbuses
  • Ideal for Multi-Compartment Filters
  • Detect Leaks and Monitor Efficiency
  • Plan Maintenance, Maintain Compliance
  • Superior to Traditional Triboelectric

Specification
Control unit

  • Enclosure: NEMA 4X Aluminum Std Other Opt
  • Temperature: -25C to 70C
  • User Interface: 3.5" Industrial TFT display, Industrial membrane keypad
Modules
  • Power supply: 115/230VAC 50/60Hz Std (10 or 20 Watts) 24VDC Opt
  • Particulate Modules (up to 32): 5.0pA Std 0.5pA Opt or DynaCharge™ 0.1pA Processor Opt
Sensors
  • Probe Lengths: 3, 5, 10, 15, 20, 30, 36"
  • Process Temperature:-40C to 120C Std 232C Opt 800-1600F Opt
  • Enclosure: NEMA 4X Aluminum Std
  • Sensor Cable: 100m Max