Accuracy:
± 5 % of reading or ± 0.02 mg/L as N (0.1 mg/L as Cl2) whichever is greater
Alarm:
Two SPDT alarm relays included; total of up to 14 programmable alarm relays (with optional Signal Output Modules)
Compliance Certifications:
UL, CSA and IEC safety standards, FCC & European RFI standards and European EMI standards
Cycle Time:
5.0 min per analysis for 1 sample stream (Optionally capable of sampling 2 streams-requires sample sequencing kit)
Enclosure Construction:
PC/ABS case, PC door, PC hinges and latches, 316 SST hardware
Enclosure Rating:
IP66 / NEMA 4X
Light source:
Class 1M LED, peak wavelength 650 nm
Lower Limit of Detection (LOD):
≤ 0.05 mg/L
Mounting Configurations:
Wall or Bench
Network connectivity:
AquaTrend network using the LonWorks protocol
Operating Humidity:
5 - 95 % Relative Humidity, non-condensing
Operating temperature range:
5 - 50 °C (41 - 122 °F); best performance: 5 - 35 °C (41 - 95 °F)
Outputs:
Two 4-20mA ouputs included; Two 4-20 mA outputs suitable for recorders or PID control. Ouput span programmable over any portion of the measuring range (130 Vac isolation from earth ground)
Parameter:
Ammonia and Monochloramine
Power requirements (Hz):
50 - 60 Hz
Power requirements (Voltage):
100 - 240 VAC
Range:
0.02 - 2 mg/L as N (0.1 - 10.0 mg/L as Cl2)
Repeatability:
± 3 % of reading or ± 0.01 mg/L as N (0.05 mg/L as Cl2) whichever is greater
Response time:
< 5 minutes for a 90% response to a step change at the sample inlet and one sample stream
Sample Flow Rate:
100 - 2000 mL/minute (500 - 1000 mL/minute recommended)
Sample Temperature:
5 - 50 °C (41 - 122 °F)
Warranty:
1 year
Weight:
25.5 kg (49.3 lb) dry, 28.9 kg (63.7 lb) wet with full analyzer bottles)
What's included?:
Hach APA6000 Analyzer, a one-month supply of reagents, Tool kit, Maintenance kit, Installation kit, Installation and Maintenance Manual, and parameter specific Manual. (The power cord is ordered separately.)