Chemistries                 1300 887 735

Nitratax plus sc Sensor, 5 mm path length with automatic cleaning

OBSOLETE ITEM

Nitratax plus sc Sensor, 5 mm path length with automatic cleaning
Product #: LXV417.99.50002

OBSOLETE ITEM

UV Analysis Eliminates Reagents, Sampling, and Sample Conditioning

Using advanced ultraviolet (UV) absorption technology, Hach Nitratax sc UV Nitrate Sensors offer unprecedented simplicity, accuracy, and economy in nitrate analysis. By continuously measuring the UV light absorbed by nitrates, Nitratax sc sensors eliminate the need for reagents, sample conditioning, and frequent calibrations.

Optional Bypass Panel

An optional Bypass Panel or flow-through sample cell is available for clean water applications when direct immersion in Optional Bypass Panel a sample stream is impractical. The Bypass Panel uses the same probes as the immersion sensors for greater flexibility.

Choice of Three Models

Nitratax plus sc Process sensor for continuous measurement in drinking water, wastewater, or activated sludge. Turbidity compensation using reference measurement. Nitratax eco sc low cost sensor for measurement, especially for sewage treatment plants with intermittent aeration technology. Turbidity compensation using reference measurement. Nitratax clear sc Process sensor for continuous measurement in clean water such as drinking water or wastewater effluent.

Self-Cleaning Sensor

With the sensor submerged in the sample stream, the detector windows are automatically cleaned by a built-in wiper that eliminate surface films or particles that can diminish accuracy.

What's included?

Nitrate probe, standard solution, user manual

Specifications

Accuracy: ± 3 % of measured value + 0.5 mg/L (with standard solution)
Ambient Temperature: 2 - 40 °C (36 - 104 °F)
Application: Outlet; Drinking water
Cable Length: 10 m fixed cable at sensor
Controller: Sensor only
Controller Compatibility: SC200, SC1000
Diameter: 70 mm
Includes: Nitrate probe, standard solution, user manual
Length: 333 mm
Lower Limit of Detection (LOD): 0.1 mg/L NO₂₊₃–N (with standard solutions)
Maintenance Requirements: 1 hour/month typical
Measuring Interval: 15 s to 30 min (fixed values selectable)
Measuring Principle: UV absorption measurement
Model: Nitratax plus sc
Operating Pressure: 0.5 bar (7.2 psi), maximum
Operating temperature range: 2 - 40 °C
Path Length: 5 mm
Power Consumption: 2 VA
Pressure Range: ≤ 0.5 bar
Range: 0.1 - 25 mg/L NO2+3-N
0 - 100 mg/L NO3
  0.1 - 25 mg/L NO₂₊₃-N
Resolution: 0.1 mg/L
Response time: ≥ 1 min
Sample Flow Rate: 0.5 - 10 L/h sample
Service Interval: 6 months or as experience dictates
Sludge Compensation: Yes
Verification: Using standard solutions
Warranty: 12 months
Weight: 3.6 kg
What's included?: Nitrate probe, standard solution, user manual