Chemistries                 1300 887 735

Sanitary (CIP) Contacting Conductivity Sensor for Low Conductivity, K=0.05

Sanitary (CIP) Contacting Conductivity Sensor for Low Conductivity, K=0.05
Product #: 3455A6A
Unit Price Contact Hach

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Sanitary clean in place (CIP) style sensors have 316 stainless steel electrodes and an integral 1-1/2-inch or 2-inch flange. These sensors can be installed using standard sanitary mounting hardware.

Full-Featured “Plug and Play” Hach sc Digital Controllers

There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

What's included?

Includes: sensor with 20 ft cable and manual

Specifications

Accuracy: ±2 % of reading above 200 µS/cm
Cable Length: 20
Cell Constant k: 0.05
Digital Gateway: None
Electrode Material: 316 SS
Installation style: Sanitary flange
Junction box: None
Measurement Range 2: 0.002 - 20 MΩ
Pressure Range: 0 - 300 psi (20.7 BAR)
Range: 0 - 100 µS/cm
Repeatability: ±0.5 % of reading
Response Time T90: 30 s of step change
Sensitivity: ±0.5 % of reading
Sensor Type: Analog
Temperature Measurement: -20 - 200 °C
Temperature Sensor: PT1000 RTD
Transmission Distance: 100 m maximum;
1000 m maximum, when used with a termination box
Warranty: 12 months
What's included?: Includes: sensor with 20 ft cable and manual