Prices Online Include GST          1300 887 735

410 ORBISPHERE controller with K1100 high range Luminescent Oxygen Sensor (Kit) - Panel

410 ORBISPHERE controller with K1100 high range Luminescent Oxygen Sensor (Kit) - Panel
Product #: K110H-KTO-P-IMP
Unit Price Contact Hach

Only 1 calibration per year

One zero point calibration per year is all that is needed with the K1100 sensor, unlike traditional electrochemical (EC) sensors, which display significant drift after only a few months and demand regular re-calibration and substantial operator time.

No membranes = 2 minutes of annual maintenance

With no membranes to replace and no electrolyte solution to replenish, the K100 requires only two minutes of maintenance per year. Corrosive or hazardous chemicals are not required, making the annual task faster, easier and safer without reducing measurement precision.

Compatible with ORBISPHERE 28 mm flow chamber for a low cost retrofit

The complete system consists of a 410 Controller, a flow chamber, and the K1100 Luminescent Dissolved Oxygen Sensor. The sensor is compatible with Hach Orbisphere 28 mm flow chambers, eliminating the need for engineering changes. Installation is fast and easy and does not require special preparation.

A New Level of Confidence

The K1100 optical sensor is the first to use luminescent measurement technology to measure low level oxygen in power plants. Since 1978, when the first patent on EC sensors was granted, Hach Orbisphere sensors have set the industry standard for oxygen measurement at ppb level.

What's included?

Includes 410 panel mount controller, K1100 high range LDO sensor, 3 m sensor cable, Stainless Steel flow-chamber with 1/4" fittings

Specifications

Accuracy: ± 0.02 ppm or 3 % whichever is greater
Ambient Temperature: -5 - 50 °C
Analog Outputs: 3 Smart 0/4 to 20 mA (500 Ohms) programmable as linear or tri-linear, configurable to send diagnostics or alarm informations.
Application: Power
Calibration: Two points at cap replacement (zero and air), one during use (air)
Certifications: 2004/108/EC - EN 61326-1
Communication Capabilities: 3 x 0/4-20 mA; RS485; Ethernet
Controller: Panel
Controller Options: 410 Mono-Channel Controller
Display Resolution: 0.1 ppb
Lower Limit of Detection (LOD): 0.015 ppm
Mounting: 1/4" flow chamber
Parameter: Oxygen
Power requirements (Voltage): 100 - 230 VAC
Range: 0 - 40 ppm dissolved O₂ (DO)
Relays: Measurement board: 3 measurement alarm relays (1A-30 VAC or 0.5A-50 VDC), configurable to send diagnostics information.
Main board: 1 system alarm relay (1A-30 VAC or 0.5A-50 VDC).
Repeatability: ± 0.015 ppm or 2 % whichever is greater
Reproducibility: ± 0.02 ppm or 3 % whichever is greater
Response time: (90%) <10 s (gas phase); <50 s (liquid phase)
Sample Flow Rate: 50 - 300 mL/min
Sample Pressure: 1 - 20 bar absolute (14.5 - 290 psi)
Sample Temperature: -5 - 50°C
Sensors: K1100 LDO
Storage conditions: -5 °C - 100 °C
Temperature Range: Accurate from -5 - 50 °C
Resistant - temperature from -5 - 100 °C
Warranty: 12 months
Weight Sensor: 0.6 kg
What's included?: Includes 410 panel mount controller, K1100 high range LDO sensor, 3 m sensor cable, Stainless Steel flow-chamber with 1/4" fittings